Tower Pro Micro Servo Motor SG90
Product Description
Tower Pro Micro Servo Motor SG90
Tiny and lightweight with high output power. Servo can rotate approximately 180 degrees (90 in each direction), and works just like the standard kinds, but smaller. You can use any servo code, hardware or library to control these servos. Good for beginners who want to make stuff move without building a motor controller with feedback & gear box, especially since it will fit in small places. It comes with a 3 horns (arms) and hardware.
Specifications :
Model | SG90 Servo Motor |
Control System | PPM |
Working Frequency | 1520μs / 50hz |
(RX) Required Pulse | 3.3 ~ 5 Volt Peak to Peak Square Wave |
Operating Voltage | 4.8 ~ 6 V DC Volts |
Operating Speed (4.8v) | 0.15 Sec/60 Degrees |
Operating Speed (6v) | 0.12 Sec/60 Degrees |
Stall Torque (4.8v) | 1.3kg/cm |
Stall Torque (6v) | 1.5kg/cm |
Motor Type | Brushed DC Motor |
Gear Type | Plastic Gears |
Case Material | Plastic |
Programmable | NO |
Connector Wire Length | 24.0cm (9.4 inch) |
Dimensions | 23 x 11.5 x 24mm |
Weight | 9 grams |
Package Include :
1 Pcs x SG90 servo
1 Pcs x 150mm Lead and Connector
3 Pcs x Plastic Arms
3 Pcs x Screws
When you order from Menstore.lk, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.
The total time it takes to receive your order is shown below:
The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.
Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.
Shipping time: The time for your item(s) to tarvel from our warehouse to your destination.
Shipping from your local warehouse is significantly faster. Some charges may apply.
In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!
Related Products
Arduino Compatible Mega 2560 ATmega2560 CH340 Development Board
Microcontroller CH340Operating Voltage 5VInput Voltage (Recommended) 7-12VInput Voltage (Limits) 6-20VDigital I/O Pins 54 (Of Which 15 Provide PWM Output)Analog Input Pins 16DC Current Per I/O Pin 40..
Arduino Mega 2560 R3 Original with Cable
Arduino Mega 2560 R3 Original with CableThe Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs..
Arduino Compatible UNO R3 ATmega328P CH340G USB Driver Board & USB Cable
Main Changes from the older version:Add two rows of the holes for the pins. So it can be connected with normal Dubond line.Add 3 rows of the holes for wiring.Change the in-line package of ATMEGA328P t..
Arduino Nano 3.0 Compatible ATmega328 FT232 with Cable
Arduino Nano 3.0 Compatible ATmega328 FT232 with CableThe Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x). It has more or less the same funct..
Gear Stepper Motor DC 5V 4 Phase 28BYJ-48 With ULN2003 Driver Module
Diameter: 28mm / 1.1inVoltage: DC 5VLength: 274mm / 10.8inStep Angle: 5.625 * 1/64Reduction ratio: 1/64 DC Resistance: 200±7% (25)Insulation Resistance: >10M (500V)Dielectric Strength: 600V AC..
MG995 Tower Pro Metal Gear High Torque Servo Motor
MG995 Metal Gear ServoThe unit comes complete with 30cm wire and 3 pin ‘S’ type female header connector that fits most receivers, including Futaba, JR, GWS, Cirrus, Blue Bird, Blue Arrow, Corona, Berg..
Gear Motor DC 3-6v For Arduino Smart Robot Car
This Mini Electric Motor is a general purpose motor, work with batteries or solar cells perfectly Great replacement for the rusty or damaged DC gear motor on the machine. Used for electronic fans, ele..
Arduino Pro Mini Atmega328 5V 16Mhz
The Arduino Pro Mini is a microcontroller board based on the ATmega328.It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, an on-board resonator, a reset butt..
4 DOF Robot Arm Structure with Servos
4 DOF Robot Arm Structure with ServosFeatures :Degree: 4 Degree of FreedomCreative 180 degree rotatingSmall and exquisite in body and structureStand: 3mm black acrylicServo: 9g plastic servoPackage in..
Tower Pro MG90S Metal Gear Micro Servo Motor
Tower Pro MG90S Metal Gear Micro Servo MotorTiny and lightweight with high output power, this tiny servo is perfect for RC Airplane, Helicopter, Quadcopter or Robot. durability. This servo has m..
SG90 MG90 Servo Motor Mount Bracket Holder
SG90 MG90 Servo Motor Mount Bracket HolderServo Mount Holder Bracket For SG90 Micro 9g is the transparent acrylic Perspex plastic mounting bracket for SG90 and MG90 Servo Motors. With this Servo Mount..