My cart

0 item(s) - Rs 0.00

  • Your shopping cart is empty!

Motor Driver L298N Module DC Stepper Dual H Bridge
Motor Driver L298N Module DC Stepper Dual H Bridge
Motor Driver L298N Module DC Stepper Dual H Bridge
Motor Driver L298N Module DC Stepper Dual H Bridge
Motor Driver L298N Module DC Stepper Dual H Bridge
Motor Driver L298N Module DC Stepper Dual H Bridge

Motor Driver L298N Module DC Stepper Dual H Bridge

0 reviews
Rs 695.00
Product Code: ROB-0005
Availability: In Stock
Viewed 313 times

Product Description

Motor Driver L298N Module DC Stepper Dual H Bridge

Work mode      : H bridge drive (double road)

Main control chip  : L298N

Packaging      : Electrostatic bag

Logical voltage  : 5V

Drive voltage  : 5v-35v

Logical current  : 0mA-36mA

Driving current  : 2A(MAX single bridge)

Storage temperature   : - 20 ℃ to + 135 ℃

Maximum power    : 25W

Weight     : 30 g

Peripheral dimensions : 43*43*27mm

Product features:

This module USES L298N as the main drive chip, with strong driving ability, low heat and strong anti-interference ability.

Through this module can use the built-in 78 m05 drive power supply parts of their work, but in order to avoid the voltage regulator chip damage, when using the driving voltage is greater than 12 v, please use the external power supply 5 v logic.

This module USES a large capacity filter capacitance, a continuation protection diode, can improve reliability.

Notes:

1. When you are driving voltage (above logo for the 12 v input, can actually accept input range is 7 to 12 v) for 7 v to 12 v, can make to onboard power supply 5 v logic, when using the onboard after 5 v power supply, interface of + 5 v

The power supply does not input voltage, but can yield 5V voltage for external use.

2. When the driving voltage is higher than 12V, it is less than or equal to 24V

(the chip manual proposes to support 35V, but according to the book

When the maximum voltage is applied to the maximum voltage of 298 conservative applications to 24V, for example, the motor with a rated voltage of 18V shall be driven.

You must first remove the board 5V output to enable the jumper cap. Then 5V is accessed outside the 5V output port

The 5V enables the power to be a control signal with a level of 5V. When the signal input is valid, and when the power supply is normal in the motor drive module, the motor drive module outputs the current. Otherwise, even if the power supply is normal, there is no current on the motor.

Voltage to L298N internal logic circuit power supply. (this is a high-pressure, unconventional app!)

Write a review

Please login or register to review

When you order from Menstore.lk, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.

The total time it takes to receive your order is shown below:

The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.

Shipping time: The time for your item(s) to tarvel from our warehouse to your destination.

Shipping from your local warehouse is significantly faster. Some charges may apply.

In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!