MAX30102 MH-ET LIVE Oximeter Heart Rate Beat Pulse Sensor

MAX30102 MH-ET LIVE Oximeter Heart Rate Beat Pulse Sensor

Rs 950.00
Product Code: SEN0039
Availability: In Stock
Viewed 1650 times

Product Description

MAX30102 MH-ET LIVE Oximeter Heart Rate Beat Pulse Sensor

The MAX30102 is an integrated pulse oximeter and heart rate monitor bio sensor module. It integrates a red LED and an infrared LED, photo detector, optical components, and low-noise electronic circuitry with ambient light suppression.

It features a 1.8V power supply and a separate 5.0V power supply for internal LEDs for heart rate and blood oxygen acquisition in wearable devices, worn on the fingers, earlobe, and wrist. The standard I2C-compatible communication interface can transmit the collected values to the , KL25Z and other micro controllers for heart rate and blood oxygen calculation

In addition, the chip can also shut down the module through software, the standby current is close to zero, and the power supply is always maintained. Because of its excellent performance, the chip is widely used in the Samsung Galaxy S series mobile phones.

Compared with the previous generation MAX30100, the chip integrates a glass cover to effectively eliminate external and internal light interference, and has the best reliable performance.

Specifications :

Main Parameters :

LED peak wavelength: 660nm/880nm

LED power supply voltage: 3.3~5V

Detection signal type: light reflection signal (PPG)

Output signal interface : I2C interface

Communication interface voltage: 1.8~3.3V~5V (optional)

Board reserved assembly hole size: 0.5 x 8.5mm

Pin :

VIN: main power input terminal 1.8-5V

3-bit pad: Select the pull-up level of the bus, depending on the pin master voltage, select 1.8v or 3_3v (this terminal contains 3.3V and above)

SCL: the clock connected to the I2C bus;

SDA: data connected to the I2C bus;

INT : Interrupt pin of the MAX30102 chip;

RD: RED LED ground terminal of MAX30102 chip, generally not connected;

IRD: The IR LED ground of the MAX30102 chip is generally not connected;

GND: Ground wire.

Package Include :

1 x MAX30102 MH-ET LIVE Oximeter Heart Rate Beat Pulse Sensor 3.3V

2 x  Male Pin Header Set

Write a review

Please login or register to review

When you order from, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.

The total time it takes to receive your order is shown below:

The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.

Shipping time: The time for your item(s) to tarvel from our warehouse to your destination.

Shipping from your local warehouse is significantly faster. Some charges may apply.

In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!